Clear Self-Adhesive Protection Film
ProMax Clear Protect film is recommended for the protection of sensitive surfaces against dirt and damage during processing, storage and mounting.
Surfaces must be free from water, grease, oil, dust and solvents before film/tape application.
Do not use cleaners containing anti-adhesive agents. Some carpets and rugs may discharge Anti-staining agents leading to possible bond failure.
Film must be removed from the surface not later than 3 months from date of application.
Film should be removed at min. temp. of +10°C. the above data tolerance can be up to a minimum of 15%.
Description
Application
ProMax Clear Protect film is used for protection of surfaces such as:
- PVC backed carpet underlays
- Carpets (needle felts, velour)
- Rugs
- Fabrics
- Rough surfaces
Technical Data
| Carrier: | Polyethylene |
|---|---|
| Carrier colour: | Transparent/Clear |
| Total thickness [mm]: | 0,050 |
| Application temperature: | 10 to 40°C |
| Adhesive (inner side): | Acrylic water based |
| Adhesion (inner side): | 2,8 N/cm; ± 0,5; QMP02 (internal method) |
| Resistance to oil: | Moderate |
| Resistance to moisture: | Moderate |
| Resistance to solvents: | Moderate |
| UV resistance: | Moderate |
| Storage: | Product should be stored in original packaging Store at temp. 10 °C to 40 °C. Storage maximum 24 month from production date. Avoid exposure to direct sunlight and moisture. |
All measurements are approximate
